WBHome Hydraulic Wire Crimper Battery Lug Terminal Cable Crimping ...

WBHome Hydraulic Wire Crimper Battery Lug Terminal Cable Crimping Tool, 8 Dies, 12 Ton

Notes:

When crimping the wire, press it to the upper and lower molds. If the micro touch is pressed on the upper and lower molds, the parts will be damaged.
When using the wire clamp, the clamp head and the die are prohibited from knocking to avoid deformation and damage.
Wires should not be used in acid and alkali and corrosive gases
Wire clamps must maintain sufficient filtered 32 mechanical oil

WARNING: Penson suggests you to which is to Stop crimping when the dies touch, anymore pressure is applied by people who are not mechanically inclined at all.

If people bottomed the die out then squeezed the tool 3 to 4 more pumps after the dies bottomed out which with 10 tons pressure, the tool showing a bent shape with stress cracks

• Made of hardened steel with chrome finish. It also provides greater stability and longer life.
• Mold configuration: 8AWG, 6AWG, 4AWG, 2AWG, 1 / 0AWG, 2 / 0AWG, 3 / 0AWG, 4 / 0-250 MCM (10,16,25,35,50,70,95,120mm2) cable and welding cable, Power cord, cable, etc.
• With this powerful crimper, you can easily crimp wires and docking connectors. It is much easier than using a pair of manual crimpers. It provides a more convenient and safe crimping operation.
• It is equipped with a safety valve. When the pressure reaches its maximum, the pressure is automatically released to prevent overpressure.
• The product is equipped with a durable yellow plastic case for easy carrying and compact storage.