VEVOR Laser Tube 40W Glass Laser Tube 110/220V CO2 700mm Length Di...

VEVOR Laser Tube 40W Glass Laser Tube 110/220V CO2 700mm Length Dia for Laser Engraving Machine and Cutting Machine

High-qualityMaterial

Using the boron silicate glass as the material, the 40 watt laser tubeis with high temperature and high pressure resistance.

TEMOO Mode

TEMOO mode is applied on the laser cutting tube to provide the better high spot concentration and high energy density. Equipped with the output mirror, the mode is further improved.

Special Coating Technology

The special coating technology is used in the discharge tube (imported German Schotter tube). The coating is a reducing catalyst mixed with materials likerare earth and gold.

Long Service Life
Compared to other products on the market, our laser tube life can reach 4,000 hours by using special coating technology.

Stable Power
The 40 watt laser uses German Schoot glass tube. Special treatment of the discharge tube improves the laser output and reduce power attenuation.

Wide Application
The co2 laser tube is perfect for laser engraving machine, laser marking machine, laser cutting machine and acrylic cutting ect.

• Power output: 40W
• Length: 700 mm
• Beam diameter: 2.5 mm
• Wavelength: 10.64 microns
• Material: Boron Silicate Glass
• Outer diameter: 50 mm
• Trigger voltage: 20KV
• Working voltage: 16KV
• Optimal operating current: 10-13mA
• Gross Weight: 5.13kg(11.30lbs)
• Package Size: 90 x 20 x 16cm/35.43 x 7.87 x 6.29inch

• 1 x Laser Tube

• HIGH TEMPERATURE RESISTANCE - This laser tube is made of the boron silicate glass that is also applied on the solar tubes. It is resistant to high temperature and high pressure.
• TEMOO MODE - The co2 laser tube adopts the TEM00 mode, which is characterized by high spot concentration, high energy density as well as good and stable spot. At the same time, the use of output mirrors further enhances the mode.
• SPECIAL COATING TECHNOLOGY - The inside of the discharge tube (imported German Schotter tube)uses the special coating technology. The coating is a reduction catalyst mixed with materials such as rare earth and gold.
• LONGER SERVICE LIFE - Our service life of discharge tubes coated with special catalysts is greatly improved. Compared with other laser cutting tubes, our 40W co2 laser can last for more than 4,000 hours.
• VARIOUS APPLICATION - Professional 40w laser, one of the spare parts of cO2 laser engraving machine, widely used in engraving and cutting acrylic, cloth, leather, bamboo, wood and other materials.