StrongTools Green Laser BoreSighter for .177 to .50 Caliber Rifle ...

StrongTools Green Laser BoreSighter for .177 to .50 Caliber Rifle Scope Hand Hunting Green Dot Boresight Kit with Press Switch Bore Sight with 2 Pieces 800mAh Battery (Universal, Green Laser)

Instructions: 1. Assemble the battery into the laser boresighter. 2. Select the proper adapter that fits in the barrel of your firearm. 3. Assemble the adapter on the small end of the laser boresighter, then screw the adapter tight to make sure the adapter will be hold well. 4. Push the small end of the boresighter with the adapter into the barrel of your firearm. Make sure the boresighter is inserted in untill it is sung with the crown of your firearm. 5. When you turn the laser on, a small red/green laser dot will be emitted. And then you can adjust your scope’s windage and elevation so that your crosshair aims at the red/green dot. Warning: Keep boresight laser beam away from eyes. Before bore sighting your scope, make sure that the firearm is unloaded and the muzzle is pointed in a safe direction. After the firearms is bore sighted, make sure to remove the boresighter and adapter from the firearm. Specifications: Material: Aluminum. Weight: 1.65oz Length: 6.57" Big end Diameter: 0.8". Small end Diameter: 0.169". Shortest barrel available: 1.95". Laser wavelength: 630-680nm. Max. Output Power: Packing List: 1 x Laser boresighter 9 x Adapters (1 extra 0.177" spare adapter) 2 x CR2 battery (800mAh each battery) 1 x Screwdriver 2 x Screws with washers 1 x Instructions 1 x Padded storage box

• Caution : Avoid the eyes to be exposed to the beam directly
• Efficiency : Increase the accuracy and speed to sight the bore for serious hunters, shooters, Policemen. Save both time and money by avoiding prolonged live fire tests at the range
• Adapters : 9 rubber adapters(1 extra 0.177" adapter) will fit almost all firearms for 0.177"-0.50" caliber rifles, hand and scopes
• Quality : Using high quality laser module with qualified electronic components to support longer and consistent lifetime
• Advantage : 2 screws with washers lock the adapters reliably, never worry the adapter will be stuck in the barrel;
• Press switch design is much easier to turn ON/OFF the laser; Screwed battery compartment design insures the big capacity CR2 battery is held reliably
• material type: 100-percent-cotton-jersey