Tapered Spindle 1/2 Hole Right Side of Motor POLISHING Buffing Wh...

Tapered Spindle 1/2" Hole Right Side of Motor POLISHING Buffing Wheel Holder (E 4)

SPECIFICATIONS: - Material: Cold Rolled Steel - Overall Length: 4-5/16" - 109mm - Arbor Body Diameter: 3/4" - 19mm - Spindle Body Length: 2-9/16" - 65mm - Spindle Shaft Depth: 1-5/16" - 33.3mm - Arbor Hole: 1/2" - 12.7mm for Shaft Connection - Weight: 3.5oz. - 100gr Spindle is made to be used on a 1/2" shaft diameter and on the Right Hand Side of Motor with forward direction. NOTE: DO NOT USE Tapered Spindles to hold Grinding Stone Wheels or Hard Heavy Wheel - IT IS EXTREAMLY DANGEROUS TO DO SO! Item is New Never Used.

• TAPERED SPINDLE FOR 1/2" ARBOR SHAFT USE ON 1/2" SHAFT MOTOR - WITH 1/2" DIAMETER HOLE- RIGHT HAND THREAD - 4-5/16" LONG- Tapered Threaded Spindle is Made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used. This Arbor - Spindle is used to hold Wheels with 1/8" Pin Hole Centers: Polishing Buffs and Felt Wheels, Satin Finsh wheels, Wood Hub Brushes... Spindle has a 1/2" arbor hole to work on 1/2" shaft Grinders, Motors or Polishers. The arbor is made and threaded to be used on the RIGHT Side of the motor. Spindle has a pair of Allen Head Set Screws to attach to your motor shaft. Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight. JETS Product # 1603-192414 FEATURES: · Precision Quality · Machining is done by CNC Equipment · Made of Steel and Anodized Finish · Allen Set Screws do not protrude above the main shaft of the spindle.