MALCO PRODUCTS C5A2 Impact C5A2 Power Assisted Crimper

MALCO PRODUCTS C5A2 Impact C5A2 Power Assisted Crimper

The Malco turbo crimper impact is a simple, compact accessory that works exclusively with the power assistance of impact Driver technology to safely and efficiently crimp 30 to 24 gauge (0.41 to O.71 mm) galvanized round duct and (0.31 to 0.61 mm) black stove pipe. The turbo crimper impact does not require set-up or adjustment. Just chuck the 1/4 inch power groove drive shaft to your cordless or corded (min.12 volt DC / max. 7 amp AC) impact Driver to immediately begin crimping multiple sizes, types and thickness of pipe and duct, including spiral duct, fast and easy. With the pipe or duct Seam in closed position, start the crimp to one side of the Seam by gently tugging on the Driver trigger and angling the turbo crimper impact onto the metal edge. Walk the Crimper around the pipe circumference in a controlled manner and then angle the Crimper off the metal as the Crimper approaches the other side of the Seam. The turbo crimper impact is five times faster than a manual crimping tool based on Actual Field trials! it is comfortable for any operator to maneuver and, lefties take Note, it works with the impact Driver in forward or reverse. The handy little turbo crimper impact is a Must-Have accessory for every HVAC installer and easily stores in a ready tool pouch or bag when not in use.

• The compact turbo crimper impact is easy to Balance while in use and stores easily in a pouch or bag when not in use
• No set-up or adjustment is needed to immediately begin crimping multiple sizes
• No set up or adjustment is needed to begin crimping different types and thickness of round metal duct, including spiral duct, and metal stove pipe
• Designed to work with a minimum 12 volt DC cordless or maximum 7 amp AC corded impact Driver equipped with a quick release 1/4 inch hex Chuck