TFCFL 10W 1420 USB Desktop CNC Laser Engraver DIY Marking Machine ...

TFCFL 10W 1420 USB Desktop CNC Laser Engraver DIY Marking Machine for Metal Stone Wood Laser Carving Machine Portable Household Art Craft DIY Laser Engraver Printer

Note:Please do not refresh the firmware, the store is not responsible for the problem after refreshing.We recommend professional installation

Specifications:
Body material: Aluminum + Acrylic
Drive system: Stepper motor
Stepper precision: 0.00625mm
Engraving area: 14 x 20cm / 5.51" x 7.87"
Engraving speed: 0.02 to 0.2 sec / pixel
Laser power: pulse 10w (100ns Duty 50%) Average 6-6.5W
Marking materials: Stainless steel, iron, anodized aluminum, ceramics, stone.
Engraving materials: Wood, bamboo, leather, plastics, etc.
Height restrictions: no
Support operating system: Windows 7/8/10
Plug:US PLUG

Power supply Input: AC 100V-240V, 50/60Hz
Power supply Output: DC 12V 4A
Software:Benbox
Weight: 4KG
Software: Machine developed for use with AC master software, support Chinese, English, Russian, 4 languages.
Package size: 65 * 35 * 25cm.
Super-reduced instruction, 1 byte of instruction accounted for more than 40%.
Faster than Arduino + grbl, and instantly able to complete the task of interpretation of active instruction; shortest path algorithm can shorten the time.

Features:
✹This machine can mark on stainless steel, iron and colorized anodized aluminum, can not engrave/mark on gold or silver, brass, etc.
✹There is no visible depth for the mark, can only leave a permanent marking.
✹Can easily cut about 3-4mm normal hardness to soft wood. Hard types of woods should be tested by yourself. Can not cut plywood.
✹Can not mark on glass or similar surface.
✹This machine can mark only on the completely flat surface since the focal length is fixed.

Package includes:
1pc 10W Laser Engraver
1pc Power supply
1pc USB cable
1pc Safety glasses
1pc Manual Lifting Platform 10x10cm \ 4"x4" (Lab Jack)

• This is the most powerful DIY Laser engraver available. It comes with 10W Laser.Support operating system: Windows 7/8/10.Minimal assembly required. Just a few screws away from connecting to your laptop!
• Plug and play, Easy to use. Connect the USB cable to the board, install the software and start engraving.It can engrave metal and stone, cut wood, foam and other materials easily.
• This machine can mark on stainless steel, iron and colorized anodized aluminum, can not engrave/mark on gold or silver, brass, etc.
• Software 255 adjustable laser power, low-light positioning, positioning freedom, gray, shortest path algorithm, nanosecond timing of serial data transmission substantially without delay, power adjustable, high power pulsed laser, lifts fast focusing, targeting low light gray print.
• Interface: USB.Software: Machine developed for use with AC master software, support Chinese, English, Russian, 4 languages.Note:Please do not refresh the firmware, the store is not responsible for the problem after refreshing.If you need the software,please contact us.