Chomas Creations Maker-Explore Precision Tip Tool, Stamping Blanks...

Chomas Creations Maker-Explore Precision Tip Tool, Stamping Blanks: Round, Dog Tags and Heart, and Die Cutting Machine Hack Guide

Instructions for using your Chomas Creations Engraving tip in your Cricut Maker or Explore machines

Maker, Explore, Explore Air, Explore Air 2:Remove the blade on the right side of the machine, clamp B. Insert your engraving tip into this slot. There are no other pieces required to use the engraving tip.

Explore One:Remove the blade from the holder by loosening the gray clamp and gently pull the blade holder from the machine. Insert your engraving tip into this slot.

1. The tool is always on the right side in place of the blade as shown in the picture on the product page.
2. Make sure you set your project toCUT. Do NOT set your project to Score or Engrave, as this will not work.
3. When you send your project to be Cut, make sure you choose a fine point blade item for your project. We use the cardstock setting and change the pressure to maximum and often use multi-cuts as needed.
4. Notice it says no tool is required in clamp A. If it is saying you need a tool in clamp A you need to change to a different setting. If it is saying it cannot detect the tool in slot B you need to change to a different material.

The Chomas Creations engraver and precision tip will work in the Maker and Explore with the proper settings chosen.

• INCLUDED: Chomas Creations Maker-Explore Precision Tip Tool, 10 stamping blanks: 4 round, 3 heart, and 3 dog tags, and Die Cutting Machine Hack Guide. All blanks are 14g aluminum, .063" thick. One side has a protective film cover. Round stamps are 1" diameter with hole; hearts are 1" with a center hole; dog tags are 1"x 2" with hole.
• PLEASE READ DIRECTIONS CAREFULLY - Set your project to CUT. Score or Engrave will NOT work. Add double sided adhesive to hold your item in place and do a multi-cut.
• All blanks are 14g aluminum, .063" thick. One side has a protective film cover. Round stamps are 1" diameter with hole; hearts are 1" with a center hole; dog tags are 1"x 2" with hole.
• Chomas engraving tool works in both the Maker and Explore (Explore, Explore Air, Explore Air 2, Explore One) machines. Does NOT work in the Silhouette machines. Examples shown are NOT included with this product.
• As always made in the USA!